Flux Polypropylene High Head 42 GPM Drum Pumps (No Motor) - 98 ft. Head - Fits 39 in. Drum

Flux Pump's sealless F/FP 424 pump is for transferring various liquids that are a low-viscosity and aggressive media. It is suitable for free flowing liquids that are clean and non-abrasive. For use with drums, totes and IBC's.

The advantage of Flux Pumps is the spiral-shaped guide bearing in the inner tube which prevents media build-up in the pump and increases the service life.

Features

• No seal in liquid zone
• Suited for hydrochloric acid and chromic acid
• Top pull out design for easy cleaning / inspection
• Long service life of bearings
• Multiple bearing drive shaft
• Low wear out of guide-bearing and shaft
• Reversible Hastelloy C drive shaft (double life)
• Low vibration
• Double radial lip seals (Viton, EPDM, PTFE)
• Spiral shaped guide bearing with large guide length
• Foot piece has a screw-on design
• ETFE impeller
• Thick wear surfaces means long working life

Specifications

• Polypropylene pump
• Pressure side connection: Thread G 1 1/4 in. A
• Flow-rate: 42 GPM (160 LPM)
• Half-Axial impeller
• 41in. diameter outer tube
• 35 mm diameter Z-impeller
• 39 in. immersion depth
• Delivery head Max. (mwc): 98 ft. (30M)
• Viscosity max.: 1200cPs
• Impeller: PTFE
• O-Ring: FKM
• Shaft: Hastelloy C, Stainless steel & Titanium
• For use with: drums, IBC, tanks, canisters, hobbocks, and containers
• Media temperature range: 32° to 122° F (0 to 50° C)
• Ambient temperature range: 32° to 104° F (0° to 40° C)
• Weight: 2.2 lbs.

Downloads

Product Manual (PDF Download)