BadgerFlex Polar Flow 1 in. Low Temperature Fuel Dispensing Hose Assemblies w/ Male NPT Ends

BadgerFlex Polar Flow 1 in. Low Temperature Fuel Dispensing Hose Assemblies w/ Male NPT Ends Description

BadgerFlex Polar Flow Low Temperature Fuel Dispensing Hose is UL listed and suitable for transferring gasoline, diesel, ethanol blends, and biodiesel blends (up to E10) in cold weather conditions (-65°F). Constructed with an inner tube made from nitrile rubber (NBR) and a chlorinated polyethylene (CPE) cover to protect the hose from external elements.

Note: Assembled with 1 in. Male NPT x 1 in. Male NPT grounded ends.

Features

• Suitable for cold weather (-65°F to 140°F )
• Nitrile rubber (NBR) inner tube provides excellent resistant to fuel and petroleum-based fluids
• Chlorinated polyethylene (CPE) cover protects against external elements and prolongs the hose's lifespan
• Reinforced with a single layer steel wire braid which provides electrical conductivity for static dissipation
• Hose is manufactured and tested in accordance with the requirements of UL330

Specifications

• Series: Polar Flow
• Type: Fuel Dispensing Hose
• Inside Diameter (ID): 1 in. (25.4 mm.) Nominal
• Outside Diameter (OD): 1.50 in. (38.1 mm.) Nominal
• Hose Ends: 1 in. Male NPT x 1 in. Male NPT
• Length: 8 - 50 ft. - Other Lengths Available - Please Call 1 (800) 333-3331 for More Information
• Inner Tube: NBR
• Antistatic Wire: Stainless Steel
• Outer Cover: CPE
• Reinforcement: Single Layer, Textile Braid
• Minimum Bend Radius: 6.50 in. (165 mm.)
• Maximum Working Pressure: 250 PSI (17.24 bar)
• Minimum Burst Pressure: 1,000 PSI (68.95 bar)
• Operating Temperature Range: -65°F to 140°F (-54°C to +60°C)
• Fluid Compatibility: Gasoline, Diesel, Ethanol Blends, and Biodiesel Blends (up to E10)
• Color: Black
• Approval: UL Recognized Component Manufactured and Tested in Accordance with the Requirements UL330
• Weight: 0.57 lbs./ft. (0.85 kg./m.)