ARO PRO Metallic Series 2 in. NPTF Aluminum Air Diaphragm Pump w/ Santoprene Diaphragms, Balls & Seats

ARO Pro Series air operated diaphragm pumps are ideal for general industrial and OEM installation applications. They can easily pump from clean, light viscosity fluids to corrosive, abrasive medium viscosity fluids and can transfer large particles without damage. Due to their pneumatic motor, they could be used in potentially explosive areas.

ARO PRO 2" metallic pumps achieve flow rates of up to 172 GPM and offer a wide array of material and porting configurations. These pumps are often used for transfer, filling, recirculation, and batching in Ceramic, Paint, Oil & Gas, Mining, Construction, Chemical, and Petrochemical markets.

Features

• Motor design delivers optimum air efficiency
• ARO's patented 'Unbalanced' air valve ensures no-stall operation
• Combine with 67174-20 screened inlet kit and use for dewatering
• Bolted construction for leak-free fluid handling
• Easy access to ball checks and fluid caps for maintenance and repairs

Specifications

• Ratio: 1:1
• Maximum Flow: 172 GPM (651 LPM)
• Displacement Per Cycle: 1.4 Gal (5.3 L)
• Air Inlet (Female): 3/4" NPTF
• Fluid Inlet/Outlet: 2" NPTF
• Max Operating Pressure: 120 PSI (8.3 BAR)
• Suspended Solids Max Dia.: 1/4" (6.4 mm)
• Max Dry Suction Lift: 27.2 Ft. (8.3 m)
• Sound Level (70 PSI, 60 Cycles/Min): 85.3 db(A)
• Center Section: Aluminum
• Fluid Caps & Manifold Material: Aluminum

Downloads