51 Gallon Aluminum Rectangle Fuel Transfer Tank w/ Fill-Rite 15 GPM Pump (12V DC) - Black Powder Coated

51 Gallon Black Powder Coated Aluminum Rectangle Fuel Transfer Tank Description

The JME 51 Gallon Powder Coated Fuel Transfer Tank & Fuel Pump is a DOT-approved aluminum transfer tank, backed by a Special Permit from the U.S. Department of Transportation. Built for commercial, state, or private use, it is designed to withstand tough conditions and is certified for gasoline, diesel, methanol, kerosene, aviation fuel, and other liquids.

Paired with the Fill-Rite FR1210H 12V DC pump, this tank provides a heavy-duty fuel transfer solution. The pump features cast-iron construction, easy installation, and protective elements to ensure reliable, efficient, and long-lasting operation in any environment.

Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty.

• The fill cap location and pump location cannot be swapped.
• Do not install risers between the fuel tank fitting and the pump.
• Do not use extension pipes to raise the height of the transfer pump.
• Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc.

Features

Tank Features

• Multi-Fuel Compatibility: This tank is suitable for a wide range of fuels, including gas, diesel, methanol, kerosene, and aviation fuel.
• Lockable Vent/Prevent Filler Cap: Equipped with a commercial-grade lockable vent/prevent filler cap, providing security.
• Fully Baffled Design: Features a fully baffled interior to reduce the movement of contents during transportation, ensuring stability.
• Reinforced Bungs: Two 2 in. NPT reinforced bungs, providing superior strength and compatibility with various fueling systems.
• Drain Port: Includes a 3/8 in. NPT drain for easy and convenient tank drainage when needed.
• Hold Down Brackets: Designed with hold-down brackets for secure mounting and stability during transport.
• Pressure Leak Detection Test: Prior to shipment, each tank undergoes a pressure leak detection test to ensure it is free from defects.
• Clean and Debris-Free: Our tanks are cleaned both inside and outside, ensuring they are free from debris and contaminants.
• 1-Year Limited Warranty: For added peace of mind, the manufacturer provides a 1-year limited warranty on this fuel transfer tank.
• DOT Certified Special Permit Issued: Our 51 Gallon Fuel Transfer Tank comes with a Special Permit issued by the U.S. Department of Transportation (DOT), ensuring its safety and compliance with regulations.

Pump Features

• Cast-Iron Construction: Built for rugged daily use, ensuring heavy-duty performance and long-lasting durability.
• Easy Installation: The adjustable electrical junction box allows flexible wiring and installation even in tight spaces.
• Long Life: A thermally-protected motor prevents overheating, guaranteeing a prolonged pump life.
• Equipment Safeguard: The built-in strainer effectively filters out fuel contaminants, safeguarding your equipment.
• Reliable On/Off Switch: The sturdy cast metal stopping arm ensures reliable operation, even with repeated use.
• Limited Lifetime Warranty: Our commitment to quality and your peace of mind, with industry-leading warranty coverage.

Specifications

Tank Specifications

• Capacity: 51 Gallons
• Material: Aluminum
• Cap Type: Vent/Prevent Filler Cap
• Bungs: Two 2 in. NPT Reinforced Bungs
• Drain Port: 3/8 in. NPT
• Dimensions: 23 1/2 in. x 60 in. x 9 in.

Note 1: Mounting tabs extend out 1-1/2 in.
Note 2: Add 2-1/2 in. for cap height

Pump Specifications

• Flow Rate: Up to 15 GPM
• Voltage: 12V DC
• Inlet: 1 in.
• Outlet: 3/4 in.
• Bung Mount: 2 in. NPT
• Housing Material: Cast iron
• Horsepower: 1/4
• Power Cord Length: 18 ft.
• Amps: 20
• Duty Cycle: 30 Min
• Package Contents:
  • Fill-Rite FR1210H 15 GPM 12 Volt Pump
  • Fill-Rite 20 - 34-3/4 in. Steel Telescoping Suction Pipe
  • 3/4 in. x 12 ft. Hose w/ Static Wire
  • 3/4 in. Manual Nozzle
  • Fill-Rite 18 ft. Battery Cable

Applications: Standard use with Mobile Tanks, Small Tractors & Equipment, Pick-up Trucks, ATVs, Snowmobiles, Racing/Automotive, Electrical/Plumbing Contractors & More

Notes:

• Mounting tabs extend out 1-1/2 in.
• Add 2-1/2 in. for cap height
• Pumps with aluminum threads must be coated with Anti-Seize prior to installation. Do not dry fit. Do not use teflon tape or pipe dope.
• Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used.
• This tank must be grounded to your vehicle. Metal to metal contact between mounting hardware and truck bed or running a ground wire to one of the mounting bolts.

* The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc. Failure to follow these guidelines will result in voiding your warranty. Do not install riser between the fuel tank fitting and the pump.

Contents

• ATTTR51PC: 51 GAL REC TANK PWDRCOAT BLACK
• TUFR1210H: 15gpm 12v DC PUMP KIT
• ELL234192: LOCTITE ANTI-SEIZE 1oz TUBE

Downloads