110 Gallon Severe Series Fuel Transfer Tank w/ GPI 20 GPM Pump (12V DC)

110 Gallon Severe Series Fuel Transfer Tank w/ GPI 20 GPM Pump (12V DC) Description

Specially engineered to thrive in the harshest conditions. Crafted to handle demanding off-road environments and accommodate larger pumps, this rugged tank is your dependable solution for secure fuel transportation. With advanced features such as a lockable SpinSecure vent/prevent cap, fully welded baffles, and an ultra-durable 50% thicker .190 in. HD aluminum construction, this tank ensures not only safety but also efficiency in fuel transport.

Note: DOT Certified for Gasoline, Diesel, Methanol, Kerosene, Aviation fuel and other liquids

GPI's G20 is the first gear pump to deliver a true 20 GPM. Its unique rotary gear design ensures a long product life with minimal maintenance. As the first pump in the G Series, the G20 features an innovative design with simplified connection points that make attaching accessories fast and easy.

Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty.

• The fill cap location and pump location cannot be swapped.
• Do not install risers between the fuel tank fitting and the pump.
• Do not use extension pipes to raise the height of the transfer pump.
• Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc.

Features

Tank Features

• Heavy-Duty Construction: Built with 50% thicker and heavier .190 in. HD aluminum, ensuring durability and longevity.
• Vent with Rollover Protection: The tank includes a vent with rollover protection, enhancing safety and functionality during transport.
• DOT Permit for Pump Attachment: The DOT permit allows transportation with the pump still attached to the tank.
• Multi-Fuel Compatibility: This tank is suitable for a wide range of fuels, including gas, diesel, methanol, kerosene, and aviation fuel.
• Lockable Vent/Prevent Filler Cap: Equipped with a commercial-grade lockable vent/prevent filler cap, providing security.
• Fully Baffled Design: Features a fully baffled interior to reduce the movement of contents during transportation, ensuring stability.
• Reinforced Bungs: Two 2 in. NPT reinforced bungs, providing superior strength and compatibility with various fueling systems.
• Drain Port: Includes a 3/8 in. NPT drain for easy and convenient tank drainage when needed.
• Pressure Leak Detection Test: Prior to shipment, each tank undergoes a pressure leak detection test to ensure it is free from defects.
• Clean and Debris-Free: Our tanks are cleaned both inside and outside, ensuring they are free from debris and contaminants.
• 5-Year Warranty: For added peace of mind, the manufacturer provides a 5-year warranty on this fuel transfer tank.
• DOT Certified Special Permit Issued: Our 110 Gallon Fuel Transfer Tank comes with a Special Permit issued by the U.S. Department of Transportation (DOT), ensuring its safety and compliance with regulations.

Pump Features

• True GPM: Achieve a full 20 GPM at the nozzle for swift refueling.
• Diecast Aluminum Housing: Lightweight and corrosion-resistant for durability.
• Rotary Gear Design: Fewer moving parts result in reduced friction and component wear.
• Spin Collar Mount: Facilitates easy installation and pump orientation.
• Factory Installed Power Cord: Speeds up the installation process.
• Circuit Breaker Protection: Safeguards against overheating, prolonging pump life.
• Quick Fit Accessories: Seamlessly attach filters, meters, or both to customize your system.
• Versatile Mounting: Simple four-bolt connections allow for multiple mounting orientations.

Specifications

Tank Specifications

• Capacity: 110 Gallons
• Material: Heavy-Duty .190 in. HD Aluminum
• Cap Type: Vent/Prevent Filler Cap
• Bungs: Two 2 in. NPT Reinforced Bungs
• Drain Port: 3/8 in. NPT

Note 1: Mounting tabs extend out 1-1/2 in.
Note 2: Add 2-12 in. for cap height

Pump Specifications

• Inlet/Outlet Connections: 1 in. NPT
• Flow Rate: 20 GPM (76 L/min)
• Duty Cycle: 30 min. ON; 30 min. OFF
• Pump Housing: Corrosion-resistant diecast aluminum
• Voltage: 12V DC with 40 amp circuit breaker switch
• Type: Rotary Gear
• Current Draw: 34-amps
• Motor: 2000 RPM, 4/10 HP, UL listed to US and Canadian Standards
• Operating Pressure: 12 PSI (0.82 bar) Standard Pressure
• Operating Temperature: -20°F to 125°F (-29°C to 52°C)

Includes

• ATSSR110: 110gal HD ALUM TANK
• GPI16200001: 12v DC FUEL TRANSFER PUMP
• ITI17920051: 3-PC 37 in. DROP TUBE
• GY100AGGASWIRE50BLK: 1 in. FARM TANK HOSE W/WIRE AGGAS
• FL70617016: 1 in. CRIMP STYLE COUPLING STEM
• GLA1437SPI: 1 in. ALUM FERRULE
• SMC34SE1010C: 1 in. 90deg GALV STREET ELBOW
• MCN1LOBF: 1 in. DSL FARM NON-UL BLK
• ELL234192: LOCTITE ANTI-SEIZE 1oz TUBE

Downloads