Ultra-Track 7220 Drain Manifold Center and Sides

SKU:
UT7220
Manufacturer:
UltraTech International
Product Type:
Center & Sides Drain Manifold
Weight:
27.50 LBS
$484.31
WARNING: This product may contain a chemical known to the State of California to cause cancer & reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Adding to cart… The item has been added

The Composite Model Ultra-Track Pans have been designed to provide railroad spill containment at industrial rail sidings and locomotive maintenance facilities. The twenty-foot long Pans can be connected and used for spill control for everything from small drips during maintenance to catastrophic spills from tanker cars. The 7220 Drain Manifold Center and Sides is used to route fluids to a holding tank or other containment areas. The Drain Manifold can be installed to add 1 drain field for each set of Ultra Track Pans. It is quickly and easily installed with a two part adhesive.   Center track pans and side track pans (if ordered) must be installed concurrently to allow for proper positioning of the drain manifold and filling of the pipe trenches under the track pans. PVC piping is used for the underground Drain Manifolds PVC has adequate strength and the necessary flexibility to give a long-lasting installation. 

Note:  For suggested piping layouts and details call for assistance. Approval needed see the Rail Height Approval Sheet attached to confirm all is needed based on area covered & system looking to be put in place. Lead-times can vary. Call a JME Sales specialist 800-333-3331 to get the details

Features

  • Easy installation - minimal site preparation (no excavation) required.
  • Modular, 20-foot spill containment pans share containment, providing unlimited capacity.
  • Pandrol compatible.
  • Optional flow through technology increases containment capacity for larger spills while minimizing cleanup of smaller spills.
  • Optional drainage manifold allows Center (# 7223) and Side(#7220) Pans to drain to oil/water separators, holding ponds, etc.
  • Drainage manifold comes with clean out port to allow for removal of sludge blockages, etc.
  • Installation requires minimal ballast removal.
  • Protected by the industry's strongest warranty - Five (5) years against any material or workmanship defects.
  • Meets SPCC, SWPPP and LEED regulations.
  • Made in the USA

Downloads

Brochure (PDF Download)

Specifications (PDF Download)

Instructions (PDF Download)

Chemical Compatibility (PDF Download)

Adhesive SDS (PDF Download)

SDS (PDF Download)

Rail Height Approval Sheet (PDF Download)