Tudertechnica Glidetech® EPDM 1 in. Brewery Hose Assembly w/ 3A Tri-Clamp Ends

SKU:
Please choose an option below
Manufacturer:
Tudertechnica
Size:
1 in.
Material:
FDA 3A White EPDM Tube
Pressure:
150 PSI
Product Type:
Clamp x Clamp Ends
Weight:
4.62 LBS
$246.73 - $602.37
Made-To-Order (MTO) item is non-returnable/non-refundable/non-cancellable unless there is a defect or warranty issue. Please allow time for assembly before shipping.
Adding to cart… The item has been added

Glidetech® EPDM Brewery hose is for use at local breweries to huge corporations. The beer industry requires specific solutions, including resistance to higher pressures and intensive sterilization cycles. Flexible hoses designed and manufactured according to the international food standards for the most different demands of the companies operating in this industry. Extremely flexible suction and delivery rubber hose, with EPDM tube, suitable for a wide range of food products. Not recommended for fatty food and oil. Tested according to the main norms for food contact materials FDA 21 CFR 177.2600. Manufactured according to GMP (Reg. (CE) 2023/2006).

Service Temperature Range: -40°F to 248°F (-40° C to 120° C)

Note: Hose comes assembled with 316 stainless steel 3A tri-clamp ends.

Features

  • FDA 3A EPDM tube, white, phthalates free, tested in compliance with 1907/2006/CE (REACH)
  • Easy to clean, wide corrugated, green, glossy cover constructed from low friction material, non-marking when dragged
  • Abrasion, ageing, ozone, oil and chemical resistant
  • Reinforced with synthetic plies and galvanized wire helices
  • Assembled with 316 stainless steel 3A tri-clamp ends, 304 stainless steel sanitary ferrules

Specifications

  • ID: 1 in. (25 mm.)
  • OD: 1.46 in. (37 mm.)
  • Length: 5 - 30 ft. - Please call 1-800-333-3331 for other lengths not listed
  • Tube: EPDM, white
  • Ends: 316 Stainless Steel 3A Tri-Clamp Ends
  • Ferrules: 304 Stainless Steel - Sanitary
  • Vacuum: 13 PSI (0.9 bar)
  • Working Pressure: 150 PSI (10 bar)
  • Burst Pressure: 450 PSI (30 bar)
  • Bending Radius: 2.76 in. (70 mm.)
  • Temperature Range: -40°F to 248°F ( -40°C to 120°C)
  • Hose Weight: 0.53 lbs./ft. (0.79 kg/m)
  • Branding: Tudertechnica Glidetech® EPDM
  • Manufactured according to GMP (Reg. (CE) 2023/2006). Norm: ISO 1307 for dimensional tolerances
  • Approvals: Meets FDA 21 CFR 177.2600;; BfR XXI cat. 2; DM 21/03/1973 and subsequent amendments; REGULATION 1935/2004/CE; Japan Ministry of Health and Welfare Notice No.370,1959 and No.201,2006; 3A Sanitary Standards Number 18-03 Class II

Downloads

Data Sheet (PDF Download)

Chemical Chart (PDF Download)

Cleaning Chart (PDF Download)

Cleaning Guidelines (PDF Download)