The M6300 series Magnetel® Rough Rider® gauges were designed to withstand the vibration and shock inherent in mobile service. Their service life in both on-highway and off-road transports, carrying liquids ranging from LP-gas to crude oil, is un-surpassed. These gauges allow a continuous reading between 5% and 95% of tank contents.
The Magnetel® Rough Rider® gauges are to be installed in the side or end of mobile tanks at the centerline. They are equipped with an exclusive spring controlled shock absorber on the float arm which substantially reduces the stress that quickly destroys conventional gauges.
The M6339 incorporates a 4" [100 mm] fluorescent R3D® Remote Ready Dial. Dial illumination for 4" fluorescent dials is possible when used with the MR Light Module (sold separately). The M6342 incorporates a standard 8" [200 mm] dial.
The Magnetel® Rough Rider® gauges are designed for working pressures ranging from atmospheric to 450 PSIG (31 BAR) .
The Magnetel® Rough Rider® gauges are to be installed in the side or end of mobile tanks at the centerline. They are equipped with an exclusive spring controlled shock absorber on the float arm which substantially reduces the stress that quickly destroys conventional gauges.
The M6339 incorporates a 4" [100 mm] fluorescent R3D® Remote Ready Dial. Dial illumination for 4" fluorescent dials is possible when used with the MR Light Module (sold separately). The M6342 incorporates a standard 8" [200 mm] dial.
The Magnetel® Rough Rider® gauges are designed for working pressures ranging from atmospheric to 450 PSIG (31 BAR) .
Features
- Designed for install in the side or end of mobile tanks at the centerline
- Equipped with shock absorber to reduce stress
- Allows continuous reading between 5% and 95% of tank contents
- Working Pressures: 450 PSIG (31 BAR)"
