The SaniForce 5:1 transfer piston pump is constructed of 300 series stainless steel, with a 2 inch (50.8 mm) sanitary tube flange outlet and can be fitted into open-head drums or directly inserted into a 4.5 inch (114 mm) closed-head drum bung. These sanitary piston pumps are ideal for most food-related, cosmetic and personal care applications.
Features
- Flow rates up to 14.0 GPM
- Maximum fluid pressure of 600 psi (41 bar; 4.1 MPa)
- Siphon up to 5,000 cps and up to 100,000 cps if immersed
- Most advanced air motor on the market
- Available in double-ball and priming piston designs
- Fluid transfer and supply of low to medium viscosity fluids
- Suitable to pump products such as: cosmetics, fruit juice concentrates, creamy candy fillings, ice cream variegates, jams and jellies
- Easily removable FDA-compliant shroud to clean and access modular air valve - reducing downtime
- Quick knockdown lowers are made with 300 series stainless steel for long-lasting durability
Specifications
- Pump Ratio: 5:1
- Pump Length: Stubby - 20.4 in. (51.8 cm)
- Pump Inlet: 4 in. (10.2 cm) OD
- Fluid Outlet: 2 in. (5.1 cm) Tri Clamp
- Max. Size Pumpable Solids: 1/4 in. (6.4 mm)
- For Use With: Food & Personal Care
- Air Inlet: 1/2 in. NPSM(F)
- Maximum Air Consumption: 75 SCFM
- Maximum Air Pressure: 80 PSI
- Maximum Continuous Cycle Rate: 60 CPM
- Maximum Flow Rate: 14 GPM
- Maximum Intermittent Cycle Rate: 60 CPM
- Maximum Working Pressure: 410 PSI
- Output per Cycle: 4.3 cycles/gal
- Maximum Fluid Flow: 14 GPM (53 LPM) @60 CPM
- Air Consumption @ 60 CPM: 75 CFM at 80 PSI (5.5 bar)
- Volume per Cycle: 0.23 Gal (0.87 L)
- Max. Operating Temp. (Fluid): 140°F (60°C)
- Max. Operating Temp. (Air Motor): 120°F (48.8°C)
- Seal Material: Nitrile Rubber, PTFE UHWPE, FKM
- Standards Met: FDA, CE
- Type: Pneumatic Piston Pump
- Wetted Parts: Stainless Steel, Nitrile Rubber, Nitrile, UHMWPE and PTFE
Downloads
SaniForce 5 to 1 Sanitary Pump Instructions and Parts (PDF Download)
Product Manual (PDF Download)
