Graco Husky 1050 1 in. Aluminum Air Diaphragm Pump w/ TPE Diaphragms, Acetal Balls & Nitrile Rubber Seats

SKU:
GR647731
Manufacturer:
Graco
Size:
1 in.
Flow-Rate:
50 GPM
Body Material:
Aluminum
Diaphragms:
TPE
Balls:
Acetal
Seats:
Nitrile Rubber
Weight:
27.00 LBS
$1,270.00
WARNING: This product may contain a chemical known to the State of California to cause cancer & reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Adding to cart… The item has been added

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps. For use in pumping gasoline and gasoline/alcohol blends up to 10% ethanol, diesel fuel, fuel oil, water, anti-freeze and lubricating oil. UL Listed for pumping gasoline and gas/alcohol blends up to 10% ethanol diesel fuel, fuel oil and lubricating oil.

Features

  • UL listed
  • 30% more efficient than the market leader
  • 20% increase in fluid flow compared to the Husky 1040
  • Up to 5 times longer diaphragm life compared to other double diaphragm pumps in its class
  • Modular air valve is stall-free, low-pulsation operation and provides smooth and rapid changeover
  • One piece center section eliminates air leaks for more efficient operation
  • Four bolted design provides even sealing pressure for leak free operation

Specifications

  • Air Inlet Size: 1/2 in. NPT(F)
  • Fluid Inlet Size: 1 in. NPT(F)
  • Fluid Outlet Size: 1 in. NPT(F)
  • Maximum Fluid Working Pressure: 100 PSI (0.7 Mpa, 7.0 bar)
  • Air Pressure Operating Range: 20-100 PSI (0.14-0.7 Mpa, 1.4-7.0 bar)
  • Air Consumption at 70 PSI: 25 SCFM
  • Air Consumption at 50 PSI: 25 SCFM
  • Fluid Displacement per Cycle: 0.17 gal. (0.64 liters)
  • Maximum values with water as media under submerged inlet conditions at ambient temperature:
    • Maximum Air Consumption: 64 SCFM
    • Maximum Free Flow Delivery: 50 GPM
    • Maximum Pump Speed: 275 CPM
    • Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables): 16 ft (4.9 m) dry, 29 ft (8.8 m) wet
  • Maximum Size Pumpable Solids: 1/8 in. (3.2 mm)
  • Recommended Cycle Rate for Continuous Use: 93 - 140 CPM
  • Recommended Cycle Rate for Circulation Systems: 20 CPM
  • Wetted Parts: Aluminum, TPC-ET, Acetal, PTFE, Nitrile Rubber
  • Non Wetted External Parts: Aluminum, Coated Carbon Steel
  • UL Listed

Applications

  • Automotive dealerships
  • Fast lube centers
  • Service shops
  • Heavy-duty dealerships
  • Fleet services facilities
  • In-plant
  • Lube trucks
  • Mining

Downloads

Product Manual (PDF Download)