The QSE Mag Series is a dependable highly accurate electromagnetic flowmeter designed for flow and usage monitoring in commercial applications. The Noryl™ housing and flow tube offers a lightweight, easy-to install Mag meter that is resistant to heat up to 180°F (82°C) and is compatible with many water-based liquid solutions. This plastic Mag Meter is specifically designed to be used in applications where plastic piping is used.
The QSE Mag Meter monitors flow rate and total flow in a wide variety of applications including: HVAC, Turf/Irrigation and other water reclamation applications.
Note: This QSE MAG Flowmeter has a Pulse Output. Other sizes and configurations available. Please call 1 (800) 333 - 3331 for more information.
Features
- Low investment and operating costs
- ± 0.5% Accuracy of Reading (from 0.25 fps to 15 fps [0.08 to 4.6 m/s])
- A wide turndown ratio of 60:1
- Non-intrusive, no moving parts to wear out, maintenance, repair costs low and tolerates high flows without damage
- The slightly modified bore permits unobstructed flow and minimizes flow disturbances and straight pipe requirements
- Housing ported with "Thermal Well Supports" for sensors (Energy Management)
- Compatible with GPI Q9 Electronics Display or FLOMEC QSI I/O Board
Specifications
- Type: Electro-Magnetic Flow Meter
- Model: QSE20NPTQBXXXA
- Size: 2 in. (50 mm.)
- Fitting Type: Male NPT
- Flow-Rate: 2.5 to 150 GPM (9.46 to 567.81 LPM)
- Accuracy: ± 0.5% Accuracy of Reading (from 0.25 fps to 15 fps [0.08 to 4.6 m/s])
- Pressure Rating: 150 PSI @ 70°F (10.3 bar @ 21°C)
- Velocity: 0.25 to 15 fps (0.08 to 4.6 m/s)
- Operating Temperature Range: 32 to 180°F (0 to 82°C)
- Ambient Temperature Range: 0 to 140°F (-18 to 60°C)
- Typical K-Factor: 400 PPG (105.7 Pulses/L)
- Electronic Choice: QB, Integral Pulse Transmitter, Unscaled Pulse Output (NPN Open Collector)
- Communication Choice: No Communication Suite
- Temperature Sensor Probes: No Temperature Probes
- Power Supply:
- Externally Powered
- Minimum Voltage Supply: 12V DC
- Maximum Voltage Supply: 36V DC
- Consumption:
- QSE with QSB: 75mA
- QSE with QSI: 150mA
- Wetted Materials:
- Body: Noryl™
- Electrodes: 316L SS
- Seals: EPDM O-Rings
- Output Frequency Range: 10 Hz Minimum - 1,000 Hz Maximum
- Calibration Report: N.I.S.T. Standard
- Approvals: IP67, CE, NSF, and CSA
Applications
- Waste Water Monitoring
- Agriculture Irrigation
- Turf Irrigation Systems
- Micro Irrigation Systems
- EMS (Energy Management Systems)
- Reclaimed (Recycled) Water
- Greywater
- BAS (Building Automation Systems)
- Chilled Water
- Domestic Water (Hot and Cold)
- Energy Sub-Metering (BTU Hot and Cold)
- OEM Water Treatment Skids
- Cooling Tower Bleed-Off
