GPI G2S Stainless Steel Meters NPT Fittings

SKU:
GRID_GPIG2S05N09GMA
Manufacturer:
Size:
3/4 in.
Size:
1 in.
Size:
1 1/2 in.
Size:
2 in.
Flow-Rate:
1 to 10 GPM
Flow-Rate:
2 to 20 GPM
Flow-Rate:
5 to 50 GPM
Flow-Rate:
10 to 100 GPM
Flow-Rate:
20 to 200 GPM
Weight:
0.00 LBS

As Low As:

$662.20
GPI G2S Stainless Steel Meters NPT Fittings

GPI G2S Stainless Steel Meters NPT Fittings

SKU:
GRID_GPIG2S05N09GMA
Manufacturer:
Size:
3/4 in.
Size:
1 in.
Size:
1 1/2 in.
Size:
2 in.
Flow-Rate:
1 to 10 GPM
Flow-Rate:
2 to 20 GPM
Flow-Rate:
5 to 50 GPM
Flow-Rate:
10 to 100 GPM
Flow-Rate:
20 to 200 GPM
Weight:
0.00 LBS

As Low As:

$662.20

The GPI Stainless Steel Meter line has a proven track record in the industrial market. GPI Stainless Steel Meters are rugged and dependable. Use stainless steel meters for most chemicals: Ammonium, Plating Solutions and Fuel products.

Pressure Rating: 1,500 PSI / 102 BAR

Features

  • Stainless steel meters have excellent chemical compatibility
  • Modular design allows for use with Output Modules, Sensors and Remote Transmitters
  • Local Display Computer features: 2 Totals (1 Resettable, 1 Cumulative); Factory Calibration in gallons and litres; 2 User Calibrations and Flowrate
  • High accuracy meter
  • Internal parts are simple to replace for easy maintenance
  • Powered by Lithium batteries for approximately 9,000 hours
  • Accessories easily upgrade meter

Specifications

  • Fitting Type: NPT or ISO (Female)
  • Housing Material: 316 Stainless Steel
  • Meter Sizes Available: 1/2", 3/4", 1", 1-1/2", 2"
  • Repeatability: ± 0.1%
  • Operating Temp. Range: -40°F to +250°F (-40°C to +121°C)
  • Operating Temp. Range w/Computer: +14°F to +140°F (-10°C to +60°C)
  • Typical K-Factor:
    • 1/2" (S05) 2,500
    • 3/4" (S07) 1,100
    • 1" (S10) 565
    • 1-1/2" (S15) 215
    • 2" (S20) 100
  • Wetted Materials:
    • Housing: 316 Stainless Steel
    • Bearings: Ceramic
    • Shaft: Tungsten Carbide
    • Rotor: PVDF
    • Rings: 316 Stainless Steel
  • Frequency Range:
    • 1/2" (S05) 42 - 420 Hz @ 1 - 10 GPM
    • 3/4" (S07) 37 - 370 Hz @ 2 - 20 GPM
    • 1" (S10) 47 - 470 Hz @ 5 - 50 GPM
    • 1-1/2" (S15) 36 - 360 Hz @ 10 - 100 GPM
    • 2" (S20) 33 - 330 Hz @ 20 - 200 GPM
  • Recommended Strainer Size:
    • 1/2" (S05) 55 mesh
    • 3/4" (S07) 55 mesh
    • 1" (S10) 55 mesh
    • 1-1/2" (S15) 28 mesh
    • 2" (S20) 28 mesh
  • Maximum Flow:
    • 1/2" (S05) 15 GPM (56.8 LPM)
    • 3/4" (S07) 30 GPM (113.6 LPM)
    • 1" (S10) 75 GPM (284 LPM)
    • 1-1/2" (S15) 150 GPM (568 LPM)
    • 2" (S20) 300 GPM (1136 LPM)
  • Wrench Flat Size:
    • 1/2" (S05) 1-1/16 inch (27 mm)
    • 3/4" (S07) 1-5/16 inch (33 mm)
    • 1" (S10) 1-5/8 inch (41 mm)
    • 1-1/2" (S15) 2-3/8 inch (60 mm)
    • 2" (S20) 3 inch (75 mm)

Video