GPI G2 Series 1 1/2 in. NPT High Pressure Turbine Flow Meter - Gallons

SKU:
GPIG2H15N09GMB
Manufacturer:
Size:
1 1/2 in.
Flow-Rate:
10 to 100 GPM
Type:
Reads Gallons
Weight:
4.50 LBS

As Low As:

$1,258.40
GPI G2 Series 1 1/2 in. NPT High Pressure Turbine Flow Meter - Gallons

GPI G2 Series 1 1/2 in. NPT High Pressure Turbine Flow Meter - Gallons

SKU:
GPIG2H15N09GMB
Manufacturer:
Size:
1 1/2 in.
Flow-Rate:
10 to 100 GPM
Type:
Reads Gallons
Weight:
4.50 LBS

As Low As:

$1,258.40

This is the turbine meter of choice for high pressure applications like spray washers and hydraulic systems. PSIG for the GPI High Pressure Meter is 3,000 compared to 1,500 for the standard stainless steel meter. This proven meter can perform in all kinds of high pressure applications.

Features

  • High pressure and high accuracy
  • Excellent chemical compatibility
  • Modular design allows for use with Output Module Sensors and Remote Transmitters
  • Local Display Computer features: 2 Totals(1 Resettable 1 Cumulative); Factory Calibration in gallons and litres; 2 User Calibrations and Flowrate
  • Internal parts are simple to replace for easy maintenance
  • Powered by Lithium batteries for approximately 9000 hours

Specifications

  • Type: Industrial Grade Meter
  • Size: 1 1/2 in. FNPT
  • Turbine with Local Display: 2 Button Computer, Field Configurable (2 Totals and Rate of Flow)
  • Calibration: Gallons/Minute
  • Housing Material: 316 Stainless Steel
  • Flow Rate: 10 - 100 GPM
  • Accuracy:
    • Turbine Only: +/- 1.0%
    • Turbine w/ Computer: +/- 0.75%
  • Repeatability: +/- 0.1%
  • Pressure Rating: 3000 PSI
  • Operating Temperature Range: -40°F to 250°F (-40°C to 121°C)
  • Operating Temperature Range w/ Computer: 0°F to 140°F (-18°C to 60°C)
  • Typical K Factor: 215 PPG/57 PPL
  • Wetted Materials:
    • Housing: 316 SS
    • Bearings: 96% Aluminum Ceramic
    • Shaft: Tungsten Carbide
    • Rotor: PVDF
    • Rings: 316 SS
  • Frequency Range: 36 - 360Hz @ 10 - 100 GPM
  • Recommended Strainer Size: 30 Mesh
  • Wrench Flat Size: 2 3/8 in.
  • Calibration Report: Comes standard with G2 Series meters
  • Approvals: CE, FM Approved, NEMA 4, ATEX EX, IP65, IECEx

Applications

  • Batching
  • Food & Beverage Processing
  • Blending
  • Fuel Products
  • Water
  • Monitoring Clean Fluids
  • Industrial Fluids
  • Plant Process Water
  • Plating Solutions
  • Chemical Feed Lines
  • Ammonium
  • Harsh Chemicals (Sulfuric Acid & Bleach)