GPI G Series 1 in. Stainless Steel Meter w/Sanitary Clamp Fitting - 6.7 to 67 GPM, 40 Mesh

SKU:
GPIGSCPS100
Manufacturer:
Size:
1 in.
Flow-Rate:
6.7 to 67 GPM
K-Factor:
896
Recommended Strainer Size:
40 mesh
Weight:
3.00 LBS

As Low As:

$1,430.40
GPI G Series 1 in. Stainless Steel Meter w/Sanitary Clamp Fitting - 6.7 to 67 GPM, 40 Mesh

GPI G Series 1 in. Stainless Steel Meter w/Sanitary Clamp Fitting - 6.7 to 67 GPM, 40 Mesh

SKU:
GPIGSCPS100
Manufacturer:
Size:
1 in.
Flow-Rate:
6.7 to 67 GPM
K-Factor:
896
Recommended Strainer Size:
40 mesh
Weight:
3.00 LBS

As Low As:

$1,430.40

This meter meets the strict 3-A Sanitary Standards using the new “Third Party Verification (TPV) program. Our methods of design, construction and traceability of components have been reviewed and approved. The internals of this meter are machined or polished to meet 3-A self-draining and cleaning requirements. The GSCPS Meter meets Clean in Place (CIP), Steam in Place (SIP) and Clean Out of Place (COP) requirements.

This sanitary clamp flow meter is made with PEEK and stainless steel components and is an excellent choice for milk products and other beverages.

Features

  • High quality
  • Extremely accurate
  • Sanitary clamp fittings
  • 3A sanitary standards

Specifications

  • Design Type: Turbine
  • Size: 1 in
  • Flow Rate: 6.7 to 67 GPM
  • Mesh: 40
  • Fitting: Sanitary Clamp
  • Accuracy: ±0.5% Linearity
  • Repeatability: ±0.1%
  • Operating Temperature: -100ºF to +225ºF up to an hour +285ºF (-74ºF to +107ºC up to an hour +140ºC)
  • Frequency: 100 to 1000 Hz
  • Pressure Rating: Limited by fitting size, clamp size, & temp.
  • Wetted Materials:
    • 316 Stainless Steel Housing
    • Nickel Plated CD4MCu Stainless Steel Rotor
    • 316 Stainless Steel Rotor Supports
    • 316 Stainless Steel Shaft
    • PEEK Sleeve Bearings
    • PEEK Thrust Bearings
    • 300 Series Stainless Steel Rings

Approvals

  • 3A Approved Sanitary Rating
  • CE
  • Clean in Place (CIP)
  • Clean Out of Place (COP)
  • Steam in Place (SIP)