FLOMEC A1 Series meters are designed as self-contained, battery powered units. Designed for water or non-aggressive chemical applications, this meter features a nylon hosing and rotor.
Features
- 5-Year battery powered
- 6 Digit floating decimal display
- Rate of flow
- Batch & cumulative totals
- Factory calibrated and field calibratable
- Add-On output options
- FM approved class I, div. I
- Choice of gallons or liters
- Custom programmable display (including UOM)
Specifications
- Housing material: Nylon
- Meter body size: 1 in.
- Connection size: 1 in.
- Connection type: NPT Female
- Flow range: 3 - 50 GPM (11 - 190 LPM)
- Design: Commercial grade - nylon (150 PSI)
- Std calibration reports included: yes
- Local computer calibrations: factory & fluid
- Factory calibrated for: water-like fluids
- Warranty period: 1 year
- Comments: For viscus fluids like oils, the temperature must not fluctuate more than ± 5° F to avoid accuracy fluctuations
- Accuracy (% of reading) factory calibrated with computer: ± 0.2%
- Repeatability (based on test conditions): ± 0.2%
- Pressure rating: 150 PSI (10.2 Bar)
- Operating temp with local computer:
- SAFE AREA ONLY (Non-FM approved): 0 to 140°F (-18 to 60°C)
- INTRINSICALLY SAFE (FM approved): 0 to 129°F (-18 to 54°C)
- Operating temp without local computer or with remote computer: -40 to 250°F (-40 to 121°C) [optional]
- Max pressure drop (at max flow in test conditions): 5 PSI
- Maximum viscosity: 100 cps**
- Recommended strainer size: 35 mesh (500 microns)
- Max. particle size: .018 in. / .457 mm
- Display type: Digital LCD
- Local/Remote display: Local
- Display function: Rate + 2 totals (1 resettable, 1 cumulative)
- LCD Digits: 6
- Totalizing display starting increment: 0.01
- Totalizing resets to 0 after reaching: 99,999,999
- Remote output: none
- Housing material: Nylon
- Rotor: Nylon
- Bearings: Ceramic
- Shaft: Tungsten carbide
- Signal generator: Ferrite
- Retaining rings: 316 Stainless steel
- Typical K-factor PPG (PPL): 730 (193)
- Sensor (Pickup): Magnetic
- Battery power: (2) AAA 1.5V alkaline battery (2 year)
- Frequency range: 36.5 - 608.3 Hz
- Desired straight pipe diameter: 40 in. Upstream / 10 in. Downstream
- Minimum straight pipe diameter: 20 in. Upstream / 5 in. Downstream
- Connection to connection length (OAL): 4.0 in. (102 mm)
- Shipping weight (approximate): 1.35 lbs (0.61 kg)
- Unidirectional but display can be rotated 180°
- Can mount horizontally or vertically
- Can use for gravity feeds
- Line must be full (no air) for proper accuracy
Downloads
GPIA1Q9GMN100NA1 Catalog page specs (PDF Download)
Q9 Display spec sheet (PDF Download)
A1 Series meter spec sheet (PDF Download)
Commercial grade turbine housing owner's manual (PDF Download)
Q9 Display instruction manual (PDF Download)
