GPI G2 Series 3/4 in. NPT Industrial Brass Turbine Flow Meter (Gallons)

SKU:
GPIG2B07N09GMA
Manufacturer:
Size:
3/4 in.
Flow-Rate:
2 to 20 GPM
Type:
Reads Gallons
Weight:
2.50 LBS

As Low As:

$657.70
GPI G2 Series 3/4 in. NPT Industrial Brass Turbine Flow Meter (Gallons)

GPI G2 Series 3/4 in. NPT Industrial Brass Turbine Flow Meter (Gallons)

SKU:
GPIG2B07N09GMA
Manufacturer:
Size:
3/4 in.
Flow-Rate:
2 to 20 GPM
Type:
Reads Gallons
Weight:
2.50 LBS

As Low As:

$657.70

The G2 Industrial Brass Meter allows another choice for fluid compatibility. The GPI Brass Meter works well with most water applications. Use with glucose, lacquer thinners and vegetable juices for example.

Features

  • High precision and durable turbine flowmeters
  • Modular design allows for use with Output Modules, Sensors and Remote Transmitters
  • Local Display Computer features: 2 Totals (1 Resettable, 1 Cumulative); Factory Calibration in gallons and litres; 2 User Calibrations and Flowrate.
  • Internal parts are simple to replace for easy maintenance
  • Powered by Lithium batteries for approximately 9,000 hours

Specifications

Housing Material: Brass

Repeatability: ± 0.1%

Operating Temperature Range: -40°F to +250°F (-40°C to +121°C)
with Computer: +14°F to +140°F (-10°C to +60°C)

Typical K-Factor:

1/2” (B05) 2,500
3/4” (B07) 1,100
1” (B10) 565
1-1/2” (B15) 215
2” (B20) 100

Wetted Materials:
Housing: Brass
Bearings: Ceramic
Shaft: Tungsten Carbide
Rotor: PVDF
Rings: 316 Stainless Steel

Frequency Range:

1/2” (B05) 42 - 420 Hz @ 1 - 10 GPM
3/4” (B07) 37 - 370 Hz @ 2 - 20 GPM
1” (B10) 47 - 470 Hz @ 5 - 50 GPM
1-1/2” (B15) 36 - 360 Hz @ 10 - 100 GPM
2” (B20) 33 - 330 Hz @ 20 - 200 GPM

Recommended Strainer Size:

1/2” (B05) 55 mesh
3/4” (B07) 55 mesh
1” (B10) 55 mesh
1-1/2” (B15) 28 mesh
2” (B20) 28 mesh

Maximum Flow:

1/2” (B05) 15 GPM (56.8 LPM)
3/4” (B07) 30 GPM (113.6 LPM)
1” (B10) 75 GPM (284 LPM)
1-1/2” (B15) 150 GPM (568 LPM)
2” (B20) 300 GPM (1,136 LPM)

Wrench Flat Size:

1/2” (B05) 1-1/16 inch (27 mm)
3/4” (B07) 1-5/16 inch (33 mm)
1” (B10) 1-5/8 inch (41 mm)
1-1/2” (B15) 2-3/8 inch (60 mm)
2” (B20) 3 inch (75 mm)