GPI G2 Series 1 in. NPT High Pressure Turbine Flow Meter (Gallons)

SKU:
GPIG2H10N09GMA
Manufacturer:
Size:
1 in.
Flow-Rate:
5 to 50 GPM
Type:
Reads Gallons
Weight:
3.00 LBS

As Low As:

$747.70
GPI G2 Series 1 in. NPT High Pressure Turbine Flow Meter (Gallons)

GPI G2 Series 1 in. NPT High Pressure Turbine Flow Meter (Gallons)

SKU:
GPIG2H10N09GMA
Manufacturer:
Size:
1 in.
Flow-Rate:
5 to 50 GPM
Type:
Reads Gallons
Weight:
3.00 LBS

As Low As:

$747.70

This is the turbine meter of choice for high pressure applications like spray washers and hydraulic systems. PSIG for the GPI High Pressure Meter is 3,000 compared to 1,500 for the standard stainless steel meter. This proven meter can perform in all kinds of high pressure applications.

Features

  • High pressure and high accuracy
  • Excellent chemical compatibility
  • Modular design allows for use with Output ModulesSensors and Remote Transmitters
  • Local Display Computer features: 2 Totals(1 Resettable 1 Cumulative); Factory Calibration in gallons and litres; 2 User Calibrations and Flowrate.
  • Internal parts are simple to replace for easy maintenance
  • Powered by Lithium batteries for approximately 9000 hours

Specifications

  • Fitting Type: NPT
  • Housing Material: 316 Stainless Steel
  • Meter Sizes Available: 1/2", 3/4", 1", 1-1/2", 2"
  • Repeatability: ± 0.1%
  • Operating Temp. Range: -40°F to +250°F (-40°C to +121°C)
  • Operating Temp. Range w/Computer: +14°F to +140°F (-10°C to +60°C)
  • Typical K-Factor:
    • 1/2" (H05) 2500
    • 3/4" (H07) 1100
    • 1" (H10) 565
    • 1-1/2" (H15) 215
    • 2" (H20) 100
  • Wetted Materials:
    • Housing: 316 Stainless Steel
    • Bearings: Ceramic
    • Shaft: Tungsten Carbide
    • Rotor: PVDF
    • Rings: 316 Stainless Steel
  • Frequency Range:
    • 1/2" (H05) 42 - 420 Hz @ 1 - 10 GPM
    • 3/4" (H07) 37 - 370 Hz @ 2 - 20 GPM
    • 1" (H10) 47 - 470 Hz @ 5 - 50 GPM
    • 1-1/2" (H15) 36 - 360 Hz @ 10 - 100 GPM
    • 2" (H20) 33 - 330 Hz @ 20 - 200 GPM
  • Recommended Strainer Size:
    • 1/2" (H05) 55 mesh
    • 3/4" (H07) 55 mesh
    • 1" (H10) 55 mesh
    • 1-1/2" (H15) 28 mesh
    • 2" (H20) 28 mesh
  • Maximum Flow:
    • 1/2" (H05) 15 GPM (56.8 LPM)
    • 3/4" (H07) 30 GPM (113.6 LPM)
    • 1" (H10) 75 GPM (284 LPM)
    • 1-1/2" (H15) 150 GPM (568 LPM)
    • 2" (H20) 300 GPM (1136 LPM)
  • Wrench Flat Size:
    • 1/2" (H05) 1-1/16 inch (27 mm)
    • 3/4" (H07) 1-5/16 inch (33 mm)
    • 1" (H10) 1-5/8 inch (41 mm)
    • 1-1/2" (H15) 2-3/8 inch (60 mm)
    • 2" (H20) 3 inch (75 mm)