GPI G2 Series 1/2 in. NPT Industrial Aluminum Flow Meter (Gallons)

SKU:
GPIG2A05N09GMA
Manufacturer:
Size:
1/2 in.
Flow-Rate:
1 to 10 GPM
Type:
Digital - Gallons
Weight:
1.38 LBS

As Low As:

$563.20
GPI G2 Series 1/2 in. NPT Industrial Aluminum Flow Meter (Gallons)

GPI G2 Series 1/2 in. NPT Industrial Aluminum Flow Meter (Gallons)

SKU:
GPIG2A05N09GMA
Manufacturer:
Size:
1/2 in.
Flow-Rate:
1 to 10 GPM
Type:
Digital - Gallons
Weight:
1.38 LBS

As Low As:

$563.20

GPI offers a full line of Industrial Meters in a variety of housing materials. Aluminum meters are best suited for petroleum based products. The modular design allows for maximum flexibility in meeting custom applications. Models are available with ISO or NPT fittings.

Features

  • High precision, durable and compact turbine flowmeters
  • Modular design allows for use with Output Modules, Sensors and Remote Transmitters.
  • Local Display Computer features: 2 Totals (1 Resettable, 1 Cumulative); Factory Calibration in gallons and liters; 2 User Calibrations and Flowrate.
  • Internal parts are simple to replace for easy maintenance
  • Lightweight, compact design allows for easy installation
  • Powered by Lithium batteries for approximately 9,000 hours

Specifications

Fitting Type: NPT or ISO (Female)

Housing Material: Aluminum

Meter Sizes Available: 1/2” 3/4” 1” 1-1/2” 2”

Repeatability: ± 0.1%

Pressure Rating: 300 PSI / 21 BAR

Operating Temperature Range: -40°F to +250°F (-40°C to +121°C)
with Computer: +14°F to +140°F (-10°C to +60°C)

Typical K-Factor:

1/2” (A05) 2,500
3/4” (A07) 1,100
1” (A10) 565
1-1/2” (A15) 215
2” (A20) 100

Wetted Materials:
Housing: Aluminum
Bearings: Ceramic
Shaft: Tungsten Carbide
Rotor: PVDF
Rings: 316 Stainless Steel

Frequency Range:

1/2” (A05) 42 - 420 Hz @ 1 - 10 GPM
3/4” (A07) 37 - 370 Hz @ 2 - 20 GPM
1” (A10) 47 - 470 Hz @ 5 - 50 GPM
1-1/2” (A15) 36 - 360 Hz @ 10 - 100 GPM
2” (A20) 33 - 330 Hz @ 20 - 200 GPM

Recommended Strainer Size:

1/2” (A05) 55 mesh
3/4” (A07) 55 mesh
1” (A10) 55 mesh
1-1/2” (A15) 28 mesh
2” (A20) 28 mesh

Maximum Flow:

1/2” (A05) 15 GPM (56.8 LPM)
3/4” (A07) 30 GPM (113.6 LPM)
1” (A10) 75 GPM (284 LPM)
1-1/2” (A15) 150 GPM (568 LPM)
2” (A20) 300 GPM (1,136 LPM)

Wrench Flat Size:

1/2” (A05) 1-1/16 inch (27 mm)
3/4” (A07) 1-5/16 inch (33 mm)
1” (A10) 1-5/8 inch (41 mm)
1-1/2” (A15) 2-3/8 inch (60 mm)
2” (A20) 3 inch (75 mm)