null

Gorman-Rupp Model Unit 812 2 in. Self Priming Centrifugal Pump

SKU:
GORUNIT812
Manufacturer:
Size:
2 in.
Flow-Rate:
150 GPM
Type:
Briggs 5.5 HP
Weight:
77.00 LBS
$2,965.77
Gorman-Rupp Model Unit 812 2 in. Self Priming Centrifugal Pump

Gorman-Rupp Model Unit 812 2 in. Self Priming Centrifugal Pump

SKU:
GORUNIT812
Manufacturer:
Size:
2 in.
Flow-Rate:
150 GPM
Type:
Briggs 5.5 HP
Weight:
77.00 LBS
$2,965.77

Gorman-Rupp Model Unit 812 is a medium head, mild solids-handling, self-priming centrifugal pump that is designed for non-stop work loads.

The straight-in-suction design guarantees quick positive priming and allows the pump to operate at higher suction levels than most other self-priming centrifugal pumps. The liquid being pumped enters directly into the eye of the impeller, and a suction check valve prevents in-line return flow when the pump is shut off.

Warning: This unit is designed to handle volatile, flammable liquids. To reduce the risk of fire or explosion, do not operate near open flames, sparks, cigarettes or any other ignition source. Do not operate the unit in an explosive atmosphere or unventilated area. Connect the attached ground cable to the nearest grounding point on the tank being filled. Shut off the engine and allow it to completely cool before refueling.

Features

  • Heavy Duty Construction
  • High-Efficiency Impeller
  • High Suction Lift
  • Replaceable Wearplate
  • Briggs & Stratton Engine

Specifications

  • Size: 2 x 2 in. NPT - Female
  • Casing: Aluminum Alloy 356-T6 w/ Gray Iron 30 Cutwater Insert
  • Maximum Operating Pressure: 50 PSI (345 kPa)
  • Semi-Open Type, Three Vane Impeller: Aluminum Alloy 356-T6 Handles 5/8 in. Diameter Spherical Solids
  • Replaceable Wear Plate: Carbon Steel ASTM A36
  • Intermediate Bracket: Gray Iron 30
  • Seal: Type 21, Mechanical, Self-Lubricated Carbon Rotating Face - Ni-Resist Stationary Face - Dupont Viton or Equivalent
  • Maximum Temperature of Liquid Pumped: 160°F (71°C)
  • Shaft Sleeve: 304 Stainless Steel
  • Flap Valve: Nitrile Nylon Coated Fabric; Gray Iron 30
  • Flange: Gray Iron 30
  • Gaskets: Cork with Nitrile Binder NC710
  • Hardware: Standard Plated Steel
  • Standard Equipment: Roll Cage with Rubber Feet - 90° Discharge Elbow
  • Model: Briggs & Stratton XR550
  • Type: Single Cylinder, Four Cycle, Air Cooled, Gasoline Engine
  • Displacement: 7.75 Cu. In. (127 cc)
  • Lubrication: Splash System
  • Air Cleaner: Dual Element, Semi Dry
  • Fuel Tank: 2 U.S. Qts. (1,9 Liters)
  • Full Load Operating Time: 1.9 Hours
  • Starter: Rope Rewind
  • Standard Equipment: Manual Start-Run Choke Control, Manual Throttle Control with Top Speed Limit - Spark Arresting Muffler & Heat Shield - Shielded Ignition - Grounding Wire