Fill-Rite NX25-DDCNB-AA 12/24V DC Continuous Duty Fuel Transfer Pump with Automatic Nozzle - 25 GPM

SKU:
TUNX25DDCNBAA
Manufacturer:
Fill-Rite
Size:
1 in.
Flow Rate:
25 GPM
Nozzle:
Automatic
Product Type:
Gas or Diesel Pump
Weight:
49.50 LBS
$1,197.99
Adding to cart… The item has been added

Fill-Rite's Nextec Intelligence™ is an exclusive array of design advancements, technologies and user functionalities that take pump performance to unprecedented levels. Intelligent Tones™ inform when attention is needed. A variable speed motor automatically adjusts for peak performance with improved suction lift. More compact, lighter, and less amp draw—it sets a new standard for efficiency.

Note: Please review product manual for proper connection to battery terminals. During installation make sure all threaded fuel connections are wrapped with three to four turns of thread tape or a pipe thread sealant approved for use with petroleum fuels.

Features

  • Continuous duty for transfering fuel all day
  • 12 to 24V DC - Accepts a range of DC Power
  • Intelligent tones indicate where attention is needed
  • Lower amp draw saves battery power and pump life
  • Lighter weight is great for mobile tanks, even aluminum
  • Auto power down after 20 minutes of inactivity
  • Magnetic switch is smooth and field replaceable
  • Removable power cord is convenient and safe
  • Improved suction lift with a variable speed motor that adjusts to load
  • Limited lifetime warranty 

Specifications

  • Flow Rate: 25 GPM
  • Voltage: 12 to 24V DC
  • Bung Mount: 2" NPT
  • Inlet:1 1/4 in. NPT
  • Outlet:1 in. NPT
  • Material: Cast iron pump housing
  • Motor: 1/3 HP
  • Power Cord Length: 20 ft.
  • Amp Draw: 29 amps
  • Duty Cycle: Continuous duty*
  • Compatible Fluids: Diesel, gasoline, biodiesel up to B20, E15, kerosene, mineral spirits
  • Package Contents:
    • 1 in. x 18 ft. Dispensing Hose
    • Ultra High-Flow Automatic Nozzle (Truck Stop Spout and Red Cover)
    • 20 ft. 10-Gauge 2-Wire Battery Cable
    • 2 in. Tank Mount with 1¼ in. Suction Port
  • Common Applications: Standard use with Mobile Tanks, Small Tractors & Equipment, Pick-up Trucks, ATVs, Snowmobiles, Racing/Automotive, Electrical/Plumbing Contractors & More

Warranty

Lifetime Warranty for Castings: Pump castings are warrantied against material and manufacturing defects for the lifetime of the pump. This excludes paint and corrosion related issues. Castings include, but are not limited to, motor frames, inlet flanges and bung adapters, junction box covers, motor housings, pump housings, switch plates, and end bells.

5 Year Warranty for Motors: The motor and associated components within the pump are warrantied against material and manufacturing defects for a period of five (5) years. Motor components include, but are not limited to, magnets, armatures, brush assemblies, thermal protectors, lead wires, brush holders, circuit boards, and circuit board wiring harnesses.

2 Years for Wearables: Wearable components necessary for the proper function of the pump are warrantied from material and manufacturing defects for a period of two (2) years. Components include, but are not limited to, seals, gaskets, O-rings, springs, vanes, bypass caps, nozzle boots, switch shaft assembly components, line switches, rotors, rotor covers, and paint*

*Paint is warrantied for material and manufacturing defects such as adhesion. Normal wear from product use, exposure to the elements, and/or chemicals resulting in paint degradation or corrosion are excluded

1 Year Warranty for Accessories: Accessories included in the package are warrantied from material and manufacturing defects for a period of one (1) year. Accessories include, but are not limited to, accessory cabling and cable connectors, elbows, hoses, nozzles, suction tubes, swivels, and anti-siphon kits.

*Product Return Policy: Please do not return this product to the store.

Ready to Ship!,fa-truck,#2a7737