Fill-Rite NX25-120NB-AH 120V AC 25 GPM Continuous Duty Fuel Transfer Pump w/ 901C Mechanical Meter and Unleaded Auto Nozzle

SKU:
TUNX25120NBAH
Manufacturer:
Fill-Rite
Size:
1 in.
Flow-Rate:
25 GPM
Product Type:
Gas or Diesel Pump
Weight:
44.00 LBS
$1,171.99
Adding to cart… The item has been added

Fill-Rite's NX25-120 continuous duty fuel transfer series allows users to fuel all day with less downtime. The NX25's robust variable speed motor actively adjusts its speed for optimal performance and produces a true 25GPM flow rate at the nozzle. It reduces long-term damage on wetted components while also improving suction lift. Its low profile, lightweight construction reduces installation time. Intelligent audible tones simplify the troubleshooting process by informing users when and where attention is needed. Its rugged powder-coated paint stands the test of time against even the toughest environmental factors. The NX25 series defines elite efficiency in fuel transfer.

Compatible Fluids: Diesel, Gasoline, Bio-Diesel up to B20, E15, Kerosene, Mineral Spirits, Methanol (up to 15%).

Note: Pump includes 901C mechanical meter, 3/4 in. x 12 ft. hose, and a 3/4 in. auto unleaded nozzle.

Features

  • Continuous duty cycle, transfer fuel all day with no downtime
  • Pumps 25% faster, eliminating hours of costly driver downtime while filling up equipment
  • Consumes up to 45% less electricity, slashing operating costs and boosting efficiency
  • 60% lighter weight, making installation faster and strain-free
  • 75% reduction in common field repair costs through quality design and construction
  • Built in remote on/off, ideal for tall above ground tanks
  • Limited Lifetime Warranty: Check the "Warranty" tab for more information

Specifications

Motor
  • Voltage: 120V AC
  • Horsepower Rating: 1/3 HP
  • Amps: 3.5
  • RPM: Variable 400-3500
  • Duty Cycle: Continuous for fuel transfer
  • Thermal Protection: Electronically protected
  • Certifications: UL/cUL Motor, ATEX, IECEx, CE
Pump
  • Type/Design: Rotary Vane
  • Mount: 2 in. NPT Bung Mount
  • Inlet: 1 1/4 in. NPT
  • Outlet: 1 in. NPT
  • Material: Cast Iron
  • Flow-Rate: 25 GPM (95 LPM)
  • Max Bypass Pressure Rating: 25 PSI
  • Dry Vac: 11 in. Hg
  • Max Head: 48.5 ft.
  • Wetted Material: Phenolic, Stainless Steel, Steel, Acetal, Thermoset, Nitrile Rubber, Fluorocarbon
  • Rotor Material: Powdered Iron
  • Rotor Vane Material: Acetal
  • Strainer Mesh Size: 20 x 20
  • Compatible Fluids: Diesel, Gasoline, Bio-Diesel up to B20, E15, Kerosene, Mineral Spirits, Methanol (up to 15%)
  • Common Applications: Commercial use with Stationary Storage Tanks, Construction Sites, Large Farm Equipment, Logging, Mining Operations, Oil Exploration, Fleet & Service Vehicles, Delivery Trucks, & Fuel Management Systems & More
Included Accessories
  • Meter: 901C Mechanical Meter
  • Nozzle: 3/4 in. Auto Unleaded
  • Hose: 3/4 in. x 12 ft.

Warranty

Lifetime Warranty for Castings: Pump castings are warrantied against material and manufacturing defects for the lifetime of the pump. This excludes paint and corrosion related issues. Castings include, but are not limited to, motor frames, inlet flanges and bung adapters, junction box covers, motor housings, pump housings, switch plates, and end bells.

5 Year Warranty for Motors: The motor and associated components within the pump are warrantied against material and manufacturing defects for a period of five (5) years. Motor components include, but are not limited to, magnets, armatures, brush assemblies, thermal protectors, lead wires, brush holders, circuit boards, and circuit board wiring harnesses.

2 Years for Wearables: Wearable components necessary for the proper function of the pump are warrantied from material and manufacturing defects for a period of two (2) years. Components include, but are not limited to, seals, gaskets, O-rings, springs, vanes, bypass caps, nozzle boots, switch shaft assembly components, line switches, rotors, rotor covers, and paint*

*Paint is warrantied for material and manufacturing defects such as adhesion. Normal wear from product use, exposure to the elements, and/or chemicals resulting in paint degradation or corrosion are excluded

1 Year Warranty for Accessories: Accessories included in the package are warrantied from material and manufacturing defects for a period of one (1) year. Accessories include, but are not limited to, accessory cabling and cable connectors, elbows, hoses, nozzles, suction tubes, swivels, and anti-siphon kits.

*Product Return Policy: Please do not return this product to the store.