price-tag

AMT/Gorman Rupp 2 in. & 3 in. Aluminum Self-Priming Diaphragm Pumps 30 - 90 GPM

SKU:
GRID_AMT335A96
Manufacturer:
Size:
2 in.
Size:
3 in.
Flow-Rate:
30 GPM
Flow-Rate:
50 GPM
Flow-Rate:
60 GPM
Flow-Rate:
90 GPM
Weight:
0.00 LBS
$1,679.20
AMT/Gorman Rupp 2 in. & 3 in. Aluminum Self-Priming Diaphragm Pumps 30 - 90 GPM

AMT/Gorman Rupp 2 in. & 3 in. Aluminum Self-Priming Diaphragm Pumps 30 - 90 GPM

SKU:
GRID_AMT335A96
Manufacturer:
Size:
2 in.
Size:
3 in.
Flow-Rate:
30 GPM
Flow-Rate:
50 GPM
Flow-Rate:
60 GPM
Flow-Rate:
90 GPM
Weight:
0.00 LBS
$1,679.20

The AMT line of Diaphragm pumps features a 2-stage, heavy duty forged gear driven transmission. Often referred to as Mud or Sludge Pumps, diaphragm pumps are designed to pump mud, slurry, sewage and thick liquids that have the ability to flow.

AMT Diaphragm pumps are available with a choice of drivers to meet your application requirements: gasoline or single phase electric motor. Built-in check valve assures self-priming to 20 feet after initial prime. Heavy duty forged gear driven transmission is designed to operate pump at 40 strokes per minute for electric motor models and 60 strokes per minute for engine driven models.

Features

  • Driver Options: Gasoline, Diesel or Electric Single & Three Phase Motors
  • 2" to 3" NPT Port Sizes
  • Maximum Temperature 180° F
  • Sand Cast Aluminum Construction for Portability and Durability
  • Thermoplastic Santoprene Diaphragm
  • 2" or 3" NPT Suction and Discharge Ports
  • Self-Priming to 25 Ft. Lift
  • Maximum Solids Handling up to 1-5/8"
  • Modular Component Design Permits Easy Maintenance and Cleanout
  • Driver Options: Gasoline, Diesel or Electric Single & Three Phase Motors
  • Delivers up to 90 GPM
  • 90° Rotatable Base on All Models
  • Models 336E-96/335E-96—1.5 HP Single Phase, 115/230 VAC Volt Motor with Manual Reset Overload
  • Models 336G-K6/335G-K6—Kit Furnished Less Engine. For use with Gasoline or Diesel Engines with 0.75" Keyed Shaft (SAE J609a Mounting Flange)
  • Models 336E-K6/335E-K6—Kit Furnished Less Motor. For use with Electric Motor (1725 RPM) or Air Motor with a Minimum of 1.5 HP (56C Mounting Flange Required)