All-Flo A Series 1/2 in. NPT Aluminum Air Diaphragm Pump, 15 GPM w/PTFE Balls

SKU:
PSGA050NAAGTPNS30
Manufacturer:
Size:
1/2 in.
Type:
A Series
Flow-Rate:
15 GPM
Body Material:
Aluminum
Diaphragms:
Geolast°
Balls:
PTFE
Seats:
Polypropylene
Weight:
10.00 LBS

As Low As:

$503.40
All-Flo A Series 1/2 in. NPT Aluminum Air Diaphragm Pump, 15 GPM w/PTFE Balls

All-Flo A Series 1/2 in. NPT Aluminum Air Diaphragm Pump, 15 GPM w/PTFE Balls

SKU:
PSGA050NAAGTPNS30
Manufacturer:
Size:
1/2 in.
Type:
A Series
Flow-Rate:
15 GPM
Body Material:
Aluminum
Diaphragms:
Geolast°
Balls:
PTFE
Seats:
Polypropylene
Weight:
10.00 LBS

As Low As:

$503.40

The most energy-efficient air operated diaphragm pump in the world. With a smart simple design perfected during years of intensive research. combines rugged reliability and ease of maintenance to deliver the best performance on the market today. Engineered to outperform the competition while using the fewest number of air valve parts in the industry. In fact, during operation, only four pieces of the air valve move. Easier to maintain, faster to fix if there's a problem, and less expensive to operate overall. Two diaphragms connected by the diaphragm rod work in unison to create the liquid motion of the pump. While one side is in suction mode the other is in discharge mode. As a diaphragm moves inward it creates suction. This suction motion causes the balls to move towards each other. As this happens the top valve closes and the bottom valve opens. This allows liquid to enter the chamber through the bottom port. As the diaphragm moves outward the discharge motion causes the balls to move away from each other. As this happens the top valve opens and the bottom valve closes. This allows liquid to exit the chambers and discharge through the top port. This process constantly alternates between the two chambers to create a continuous cycle. The pump diaphragms are driven by pressurized air that is directed left and right by the movement of the main air valve.

Note: Pumps must be configured with the bottom suction for use with a Drum kit , and can be field installed as long as the pump has the suction down option.

Specifications

  • 15 GPM
  • Aluminum body
  • Geolast° diaphragms
  • PTFE balls
  • Buna-N O-Ring
  • Polypropylene seat
  • 1/4 in. FNPT air inlet
  • 120 PSI
  • 1/2 in. liquid inlet
  • 1/2 in. liquid discharge
  • 1/8 in. max diameter solids
  • FNPT/FBSPT (threaded)
  • 15 ft. H2O Dry/ 31 Ft H20 Wet Max Suction Lift Capability
  • 0.03 Gal/ .10 Liters Displacement Per Stroke
  • 3/8 in. FNPT air exhaust
  • 80 dBA noise output

Downloads

Product Manual (PDF Download)

Spec Sheet (PDF Download)

Brochure (PDF Download)